Series FC Constant Flow Valves

Applications:
Recommended whenever flow rate must be maintained regardless of unplanned or fluctuating demand elsewhere: Install Series FC prior to each point of use to eliminate surges and sudden drops in flow.

Importants:
These flow controls are designed for liquids similar in viscosity to water. All applications should be tested for flow characteristics and chemical compatibility to insure desired results. Swelling of the diaphragms in certain liquids will result in loss of flow rate accuracy. An in-line strainer or filter should be installed before the flow control when suspended solids are present, and for all applications below 1.0 GPM (3.8 LPM).

Size:

1/4" - 3"

Body:

PVC (standard). Natural polypropylene, PTFE and Kynar PVDF available.

Seal:

EPDM

Stroke

4 Stroke

Max Power

62kW/6000 (r/min)

Cylinders

2 Cylinder

Max Torque

101N·m/5000 (r/min)

Displacement (ml)

1000CC